Precision Digital PD540 - Manual (Page 45)

Installation Steps
1. Cut the mounting panel. (Refer to 7.1 Dimensions and Panel Cutouts)
2. Insert the controller through the front of the panel rear terminals first.
3. On applicable models, attach the right and left mounting bracket and secure it to the panel.
4. On 1/16 DIN controller models, slide the mounting bracket onto the back of the controller as shown, and slide it
forward on the controller until the bracket locks in place, and the controller is secure.
Do not excessively tighten the mounting bracket screws. Excessive tightening may lead to
controller or panel damage. !
CAUTION
7.2 Panel Mounting
PD542-PD543
PD548-PD549 PD544-PD545
Panel
Mounting Bracket
Panel
Mounting Bracket
Panel
Mounting Bracket
Panel
Mounting Bracket
PD540-PD541
PD546-PD547
PD540 Series Nova Digital Process and Temperature Controller Instruction Manual
45