Ind. lunar rk200dtg3 configuration options, Led display – RISCO Group Industrial LuNAR User Manual
Page 7
Ind. LuNAR RK200DTG3 Installation
Guide
5
Ind. LuNAR RK200DTG3 Configuration Options
The Ind. LuNAR RK200DTG3 can be configured and/or diagnosed remotely via one of the options:
Manual
configuration
Remote
Control
Device
ProSYS Bus
Control
ACT Mode
LEDs
MW Sensitivity
(
by trimmer)
Diagnostics
-
Status/Trouble/Info Reports
-
AM Diagnostics
- -
MW Bypass
- -
MW Disable on Disarm
("Green Line")
- -
LED Display
The three Tri color LEDs in the Ind. LuNAR RK200DTG3, operate as herein described:
LED
STATE
MEANING
Red
Steady
Detector alarm (simultaneous PIR and MW
detection)
Flashing with low frequency
Indicates malfunctioned communication
with ProSYS
Flashing with high frequency
AM detection
Green
Steady Microwave
detection
Flashing
Trouble in the MW channel
Orange
Steady PIR
detection
Flashing
Trouble in the PIR channel
All LEDs
Flashing with change of color
Upon power up
Eng
lish