Rose Electronics UltraVista LC II - Manual (Page 18)

OPERATION
UltraVista LC II HDMI Installation and Operations Manual 12
Using the Built-In OSD features
To invoke the built-in OSD, press the MENU/ENTER button on the front
panel. The OSD will display on the monitor connected to the DVI output
port #1.
(Note: All cable connections and power must be applied.)
OSD Buttons
There are several On Screen Display (OSD) control buttons located on the
right side of the front panel. The figure below shows the arrangement of
OSD controls.
Figure 7. OSD Buttons

Menu / Enter – Enters the OSD, selects items and sets the new values
entered.

Left – Moves the selection left.

Right – Moves the selection right.

Up – Moves the selection up

Down – Moves the selection down.

Exit – Exits from any menu.
Menu/ Up Down Left Right Exit
Enter