Centrifugal pumps - pkx service – Subaru Robin PKX201 User Manual
Page 33
Advertising
Centrifugal Pumps - PKX
Service
- 33 -
18. If the seal seems to be stuck, squirt some liquid soap
on the seal .This will loosen it from the black outer
rubber seal. Using one or two screwdrivers, pry the
seal outward. It may become necessary to remove the
pump backplate when the seal is stuck . See step 22
for removal of backplate.
19. This is what the seal will look like when removed.
20. Make sure never to use the back side of a seal when
reinstalling. The back side of the seal will usually have
some colored marks indicating it is the wrong way.
17. Use a small screwdriver to pry between the ceramic
seal and the black rubber seal that holds it in place.
Advertising