Subaru Robin SGX3500 - Manual (Page 40)

- 38 -
7-4-7 FUEL TANK
(1) Hand tighten the strainer screw as far as
it will go, loosen it again by one or two
rotations (fuel outlet faces down), then
tighten the lock nut.
(2) Mount the fuel tank on the frame.
M6 x 25 mm flange bolt . . . 4 pcs.
Washer M6 . . . 4 pcs.
Spacer . . . 4 pcs.
Tank mounting rubber . . . 4 pcs.
Locking nut. . . . . . . . . . . . 4 pcs.
NOTE : For easy tank assembly, glue the
rubber washers over the mounting
holes of the frame.