Setting the input and output, Setting the output, Setting the output format – Edirol V-44SW E1 User Manual

Page 30: Setting the output format” (p. 30), Changing the output format” (p. 30), P. 30

Advertising
background image

30

Setting the Input and Output

The V-44SW handles input and output video in differing video
formats, thus requiring adjustment of the image quality and
field of view for each format.

Appropriate settings need to be made for the input and output,
to accommodate both the device that will be supplying the
input to the V-44SW and the device to which the V-44SW will
be outputting video.

Confirm the settings for the input and output by checking the
output video as you make the settings.

Setting the Output Format

1

Press one of the OUTPUT FORMAT buttons [1080i],
[720p], or [RGB] to select the output video format.

Select the output format matching the specifications of the
display you are using to display the final video output.

The V-44SW is set at the factory to allow selection of the
following formats with the OUTPUT FORMAT buttons.

<Factory Settings>

If selecting a different output format, follow the instructions
in “Changing the Output Format” to change the output
format for each OUTPUT FORMAT button.

You can the change the output formats assigned to each
OUTPUT FORMAT button.

1

Press the [MENU] button to display the Main menu.

2

Select “1. Output” then select the name of the button
whose setting you want to change with “1: Output
Format (1080i) Sw”–”3: Output Format (RGB) Sw” in
the sub-menu.

3

Set the output format.

For more on output formats, refer to“Compatible Output
Formats” (p. 31).

Start by making settings for the output.

Settings determining image quality, such as those for the
brightness, hue, and contrast, need to be made for both
the input and output. However, when adjusting image
quality, you should begin by making settings for the
output, so they serve as a reference point for other
adjustments.

If you adjust the image quality of the input first, then
change the output settings later on, the video’s colors
and field of view will end up differing from those at the
time the input settings were made.

Setting the Output

Button

Output Format

Output Connector

[1080i]

1080/60i

HD/RGB OUT PGM connectors 1, 2

HD/RGB OUT PREVIEW connector

[720p]

720/60p

[RGB]

1024x768/60

Changing the Output Format

V-44SW_e.book 30 ページ 2006年10月23日 月曜日 午後3時25分

Advertising