Advanced p in p effect settings – Edirol V-44SW E1 User Manual

Page 40

Advertising
background image

40

Adding Effects to the Video

If the P in P effect is turned off while the sub-screen is still
being displayed, the video on the channel assigned to the sub-
screen at that time becomes the final output video.

If you do not want the final output video to switch, first press
the [TAKE] button to hide the sub-screen, then switch off the
P in P effect.

Advanced P in P Effect Settings

Use these procedures to adjust the sub-screen’s position and
size, border appearance, and other sub-screen settings.

1

Press the [MENU] button to display the Main menu.

2

Select “4. P in P/Zoom” to display the sub-menu.

You can make changes to the following parameters.

*1 No border is displayed when the Key Composite effect (p. 41)

is switched on.

You can register the sub-screen settings in the presets, making it
simple to call up settings later on. For more detailed information,
refer to “Registering Often-Used Settings (Panel Presets)” (p. 42).

The field of view for the sub-screen can be adjusted using the
“10: Crop” settings as shown below.

About the Final Output When the P in P Effect
is Off

4. P in P/Zoom Sub Menu (

p. 56)

1: Size

Sub-screen size adjustment

2: X Position

Sub-screen horizontal position
adjustment

3: Y Position

Sub-screen vertical position adjustment

4: Zoom

Sub-screen zoom size adjustment

5: Pan X Position

Sub-screen panning horizontal position
adjustment

6: Pan Y Position

Sub-screen panning vertical position
adjustment

7: Border Size

*1

Sub-screen border width adjustment

8: Border Color *1

Sub-screen border color adjustment

9: Border Edge *1

Sub-screen border edge setting

Hard: Straight-line border edges

Soft: Graduated border that fades away

10: Crop

Selects crop mode of sub screen

For more detailed information, refer to
“Adjusting the Field of View for the Sub-
Screen” on this page.

11: P in P Reset

The sub-menu settings are returned to
their factory default settings (

p. 29).

Adjusting the Field of View for the
Sub-Screen

Value

Sub-Screen Aspect Ratio

Original

The sub-screen is displayed with the same aspect
ratio as the background screen.

4:3

If the video is input with an aspect ratio of 16:9, it is
cropped and displayed in the sub-screen with the
4:3 aspect ratio.

16:9

If the video is input with an aspect ratio of 4:3, it is
cropped and displayed in the sub-screen with the
16:9 aspect ratio.

16:9

This portion is cropped,
resulting in a 4:3 aspect ratio

4:3

This portion is cropped,
resulting in a 9:3 aspect ratio.

V-44SW_e.book 40 ページ 2006年10月23日 月曜日 午後3時25分

Advertising