Edirol V-44SW E1 - Manual (Page 42)

42
Registering Often-Used Settings (Panel Presets)
You can register button settings, settings for the Picture in
Picture (P in P) and other special effects, and other settings as
presets. You can register up to fifteen presets.
You can call up registered presets instantly just by pressing
the PANEL PRESET buttons.
In addition, the original default settings programmed at the
factory have already been registered as “Factory Preset.”
Check the factory preset parameters in the table below to
confirm the content registered in Factory Preset.
● You cannot export the content of registered presets.
1 Hold down the PANEL PRESET button for the preset
number you want to register for at least two seconds.
Presets 1–8 can be registered when the [SHIFT] button is
unlit (Presets 9–15 can be registered when the button is lit).
When registration of the preset is completed, all of the
PANEL PRESET buttons flash.
1 Press the PANEL PRESET button for the preset
number you want to call up.
Presets 1–8 can be called up when the [SHIFT] button is
unlit (Presets 9–15 can be called up when the button is lit).
The pressed button lights, and the preset is called up.
● You can confirm which preset is called up by checking the color in
which the button lights.
• Use of certain functions together may result in
disruption of the video images. We recommend
testing settings configurations beforehand when
switching presets.
1 Press the [SHIFT] button so it’s lit, then press the
PANEL PRESET [FACTORY PRESET] button.
The Factory Preset is called up.
● Check the Factory Preset parameters in the table at the left to
confirm the content registered to the Factory Preset.
Settings Registered to the Presets
Settings Factory Preset See
Page
Buttons [P in P] Button Off p. 39
[KEY] Button Off p. 41
TRANSITION Select
Buttons [MIX] Button p. 38
Channel Selection
Buttons SD VIDEO [1] Button p. 36
P in P effect Size 30% p. 39
X Position -25%
Y Position +25%
Zoom 105%
Pan X Position 0%
Pan Y Position 0%
Border Size 0
Border Color Black
Border Edge Hard
Crop Original
Key composite
effect Key Type Luminance Key2 p. 41
Key Level 128
Key Soft Edge 3
Other Output Fade Mode Auto p. 28
OUTPUT FADE
Level No fade ---
Registering Presets
Calling Up Presets
Lit (Green) Presets 1–8
Lit (Red) Presets 9–15, Factory Preset
Off No preset selected
Calling Up the Factory Preset
Hold down for at least two seconds.
V-44SW_e.book 42 ページ ２００６年１０月２３日 月曜日 午後３時２５分