Menu list, Main menu, Sub menus – Edirol V-44SW E1 User Manual

Page 54: Output, Output (p. 54), Output p. 54), P. 54)

Advertising
background image

54

Menu List

This is the Main menu list displayed when the [MENU] button is pressed.

You can select from the following formats for use with the final output.

* The selectable component format changes as above depending on the setup for “1: System Frame Rate” under “8. System.”

* RGB units: horizontal (pixels) x vertical (lines) / frame rate (Hertz)

Main menu

Parameters

Explanation

Sub Menu

1. Output

Settings for the final output are made here.

p. 54

2. SD Input

SD input settings are made here.

p. 55

3. HD/RGB Input

HD/RGB input settings are made here.

p. 55

4. P in P/Zoom

Advanced settings P in P effect are made here.

p. 56

5. Key

Advanced settings key composite effects are made here.

p. 56

6. Wipe Select

Wipe effect settings are made here.

p. 57

7. Panel Preset Edit

Panel presets are managed here.

p. 57

8. System

The V-44SW’s system settings are made here.

p. 58

9. MIDI Setup

MIDI-related settings are made here.

p. 58

10. Factory Reset

This restores the V-44SW to its original factory default settings.

--- (Procedure:

p. 29)

Sub Menus

1. Output

Parameters

Explanation

Values

1: Output Format (1080i) Sw

Output format assigned to OUTPUT FORMAT [1080i] button

Refer to “About the Final Output Format”
below.

2: Output Format (720p) Sw

Output format assigned to OUTPUT FORMAT [720p] button

3: Output Format (RGB) Sw

Output format assigned to OUTPUT FORMAT [RGB] button

4: Output Format Sw Lock

OUTPUT FORMAT button lock

Off, On

5: Zooming

Final output scaling adjustment

80.0–120.0

6: Bright

Final output brightness adjustment

-64–+64

7: Contrast

Final output contrast adjustment

-64–+64

8: Saturation

Final output saturation adjustment

-64–+64

9: Red

Final output red adjustment

-64–+64

10: Green

Final output green adjustment

-64–+64

11: Blue

Final output blue adjustment

-64–+64

12: Output Fade Mode

Final output fade control adjustment

Auto, Manual

13: Output Fade Color

Final output fade color setting

Black, White

14: Test Pattern Select

Selects the Test Pattern to output

Off, 75% Color Bar, 100% Color Bar

15: Output Reset

The sub-menu settings are returned to their factory default
settings

--- (Procedure:

p. 29)

About the Final Output Format

Component

RGB

<NTSC>
1080/60i
720/60p
480/60p
480/60i

<PAL>
1080/50i
720/50p
576/50p
576/50i

1366x768/75
1366x768/60
1280x1024/60

1280x768/75
1280x768/60
1024x768/75
1024x768/60

800x600/75
800x600/60
640x480/75
640x480/60

Settings for the final output are made here.

V-44SW_e.book 54 ページ 2006年10月23日 月曜日 午後3時25分

Advertising