PLANET IPX-1900 - Manual (Page 8)

Front Panel Indicators
Figure 1-1. Front Panel of IPX-1900
8
Table1-1. Front Panel description of IP PBX
Rear Panel Indicators
Figure 1-2. Rear Panel of IPX-1900
1 12V DC 12V DC Power input outlet
2 Reset
The reset button, when pressed, resets the IP PBX without the
need to unplug the power cord.
3 WAN
The WAN port supports auto negotiating Fast Ethernet
10/100Base-TX networks. This port allows your IP PBX to be
Front Panel LED State Descriptions
PWR
On
Off PBX Power ON
PBX Power OFF
SYS
On
Flashing System is booting
System is ready
LAN
On
Flashing
Off LAN is connected successfully
Data is transmitting
Ethernet not connected to PC
WAN
On
Flashing
Off PBX network connection established
Data traffic on cable network
Waiting for network connection
FXO/FXS Port
On
Flashing
Off Port is busy
Ring indication. (FXS only)
Port is not enabled.