PLANET IPX-300 - Manual (Page 22)

Gateway Trunk
Gateway Trunk Setting allows IP PBX makes VoIP calls to external Gateway by peer-to-peer mode. If
the FXO ports of external Gateway have connected with PSTN lines, the user can make outgoing
PSTN calls via external Gateway by this function.
Figure 3-10. Gateway Trunk setting
IP
Destination IP Address is the IP address of the destination
Gateway that owns this phone number.
Port Port is port of the destination Gateway use. (Default is 5060)
Table 3-10. Gateway Trunk setting description
Trunk Group
Trunk Group is defines the leading digit of the call out dialing number through SIP Trunk or Gateway
Trunk. The IP PBX will according to the leading digit to determine to use which SIP or Gateway Trunks
for outgoing route.
Figure 3-11. Trunk Group setting
Press “more” to show the Service Provider Number under the group.
Figure 3-12. Trunk Group setting - 2
Figure 3-13. Trunk Group more information
22