PLANET IPX-300 - Manual (Page 9)

Rear Panel Indicators
Figure 1-3. Rear Panel of IPX-300
Figure 1-4. Rear Panel of IPX-300W
1 12V DC 12V DC Power input outlet
The reset button, when pressed, resets the IP PBX without the
2 Reset
need to unplug the power cord.
3 WAN
uto negotiating Fast Ethernet The WAN port supports a
10/100Base-T networks. This port allows your IP PBX to be
connected to an Internet Access device, e.g. router, cable modem,
ADSL modem, through a CAT.5 twisted pair Ethernet cable.
The LAN port allows your PC or Switch/Hub to be connected to the
IP PBX through a CAT.5 twisted pair Ethernet cable.
4 LAN
5
External
A
(I
12/6Mbps
ntenna 2db
PX-300W only)
Used to Wirelessly Connect to 802.11b/g networks
802.11b: 11/5.5/2 Mbps
802.11g: 54/48/36/24/19/
Table 1-2. Rear Panel description of IP PBX
9