PLANET SIP-50 - Manual (Page 12)

SIP-50 SIP Proxy Server User’s Manual
Chapter 4：Web Configuration
This chapter introduces how to configure the SIP Proxy Server to effectively control your SIP network.
On the top of the Web interface, there is three major menu of the SIP Proxy Server:
System Settings: The basic system configurations
Subscriber: The function that will be used to manage the subscriber
Logout: You can logout the management interface after finishing your configuration.
The SIP Proxy Server will need the three parameters before it to serve the IP endpoint: Config, (illustrated in
section 4.1.6), Authorization (illustrated in section 4.1.7) and Subscriber, (illustrated in section 4.2).
However, some of the configurations are also required. Please refer to the related section for the details.
4.1 System Settings
System settings menu contains three categories: “General” allows you to configure basic network
parameters, Internet connection bandwidth and date/time. “MISC” allows you to define SIP-50 parameter,
Prefix Route and Authorization which is needed for SIP network operation. “Admin” contains options to
setup SNMP, backup / restore settings, upgrade firmware, etc.
4.1.1 Information
This section shows information about the SIP Proxy Server
- 9 -