PLANET SIP-50 - Manual (Page 5)

SIP-50 SIP Proxy Server User’s Manual
1.3 SIP Proxy Server Front View
- Front View:
LCD Panel LED Panel
LCD Panel: Used to make IP settings, view IP settings, reboot system, show service information, reset
password and reset all configuration. It also show the average bandwidth usage for past 10 seconds when not
in configuration mode. Check section “Initial Setup by LCD panel” for detail on IP settings. The following
table shows the button function.
Button Function
(Enter) Used to select or confirm the selection
(ESC) Used to cancel the selection or back to previous
manual
(▲) Change to previous option or increase the number.
Press longer to increase the number by 10.
(▼) Change to next option or decrease the number.
Press longer to decrease the number by 10.
LED Panel: Used to show the system and connection status. The following table show the connection LED
definition.
LED Status Meaning
PWR Lit Green Indicates the device is receiving power
STATUS Lit Red Indicates the device is reading data
from memory
LNK Lit Green Link is established on machine LAN
interface
ACT Blink
Green Packets are transmitting or receiving
on LAN port
Lit Green Indicates the link operate on 100Mbps 100
Off Indicates the link operate on 10Mbps
- 2 -