PLANET SIP-50 - Manual (Page 13)

SIP-50 SIP Proxy Server User’s Manual
4.1.2 Network
You can setup SIP Proxy Server network settings in this section.
♦ Host Name: Please assign a name that is easy to remember for SIP Proxy Server.
♦ Domain Name: Your local network domain name. The SIP Proxy Server will use this value as SIP
Domain.
♦ DNS Server: Your ISP’s DNS server IP or your DNS server IP.
♦ IP Address: Please assign an IP that is not in use by other device for SIP Proxy Server. The default IP
address of SIP Proxy Server is 192.168.0.1.
♦ Network Mask: Your local network subnet mask. For example, 255.255.255.0.
♦ Default Gateway: network default gateway. For example, 192.168.0.254.
♦ Save: Press save button to save all these configurations.
Note: If you have modified the IP address to a different IP subnet, you need to also modify the IP
address of management client’s IP address settings.
4.1.3 Date/Time
The Date/Time menu contains commands for setting SIP Proxy Server's time and date required for correctly
record the CDR. User can directly input the date and time or specify the NTP server for the device to
synchronize with time-server. Click on “Date/Time” in the system settings menu bar and the Date/Time
screen will appear as illustrated below:
♦ Date: Input the year and select the Date from the pull-down list respectively.
♦ Time: Select the Time from the pull-down list respectively.
♦ NTP Server: Local NTP (Network time protocol) server IP or DNS name. The system will auto adjust the
system time each day. If you want to manually configure the date and time, left this field blank.
Note: Please find below NTP server web address for your reference to set the time-server.
http://www.eecis.udel.edu/~mills/ntp/clock1a.htm
http://www.eecis.udel.edu/~mills/ntp/clock2a.htm
♦ Time Zone: System administrator must select the time zone for the region.
♦ Save: Press save button to save all these configurations. If you have input a NTP server IP address or
DNS name, the SIP Proxy Server will try to inquire the current time and update the Date and Time field.
- 10 -