BenQ TH683 - Manual (Page 28)

Operation 28
4. If you are prompted for a password, press the arrow keys to enter a six digit
password. See
"Utilizing the password function" on page 39 for details.
5. Switch all of the connected equipment on.
ii. Specify OSD Language.
iii. Specify Keystone.
• While the Auto Vertical
Keystone is On
• Press▲/▼key to disable Auto
Vertical Keystone
• While the Auto Vertical
Keystone is Off
• Press OK for 2 seconds to
enable Auto Vertical
Keystone
• Press BACK for 2 seconds to
reset the Vertical Keystone
value
iv. Specify Auto Source.
v. Specify Menu Type.
Now you’ve completed the initial setup.