Setting and editing vocal harmony types (psr-s970), Setting up the vocal harmony control parameters – Yamaha PSR-S770 User Manual
Page 91
PSR-S970/S770 Reference Manual
91
8
Micr
ophone/Guit
ar Input
Setting up the Vocal Harmony Control Parameters
You can set which part controls the Vocal Harmony regardless of the current Vocal Harmony Type.
1
Call up the Vocal Harmony Type Selection display.
[MIC SETTING/VOCAL HARMONY] [E] (TYPE)
NOTE
Check that the microphone is properly connected (Owner’s Manual, chapter 8) and the settings (Reference Manual,
) are adjusted correctly before
setting the Vocal Harmony Control parameters here.
2
Press the [8
] (SET UP) button to call up the Setup display, then set the value by
using the [2
]–[5 ] and [7 ] buttons.
For information on each parameter, see
.
3
After you finish setting the value, press the [EXIT] button to close the Setup display.
Setting and Editing Vocal Harmony Types (PSR-S970)