Asus ZenPad 10 (Z300M) - Manual (Page 18)

Chapter 1: Get your Zen ready! 18
To charge your ASUS Tablet:
1. Connect the micro USB cable to the power adapter.
2. Plug the power adapter into a grounded power outlet.
3. Plug the micro USB connector into your ASUS Tablet.
IMPORTANT!
• Charge your ASUS Tablet for eight (8) hours before using it in battery mode for the first time.
• The status of battery charge is indicated by the following icons:
Low Not Charging Charging Full
4. When fully-charged, disconnect the USB cable from your ASUS Tablet first before unplugging
the AC power adapter from the power outlet.
NOTE:
• You can use your device while charging but it may take longer to fully charge the device.
• Charging your device via USB port of a computer may take longer to fully charge the device.
• If your computer does not provide enough power for charging via USB port, charge your ASUS Tablet
using the AC power adapter plugged to a power outlet instead.