Adjusting the flash output – Canon PowerShot G7 X Mark II User Manual
Page 103
103
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Recording Movies at Specific Shutter
Speeds and Aperture Values
Still Images
Movies
Set your preferred shutter speed, exposure, aperture value, and ISO
speed.
For details on available shutter speeds, see “Camera” (= 217).
For details on available aperture values and ISO speeds, see “Aperture”
(= 218) and “Changing the ISO Speed” (= 80).
1
Enter [ ] mode.
z
Set the mode dial to [ ].
z
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 29).
2
Configure the settings.
z
Turn the [ ] dial to set the shutter speed.
z
Turn the [ ] ring to set the aperture
value.
3
Shoot.
z
Press the movie button.
z
You can also adjust settings while
recording, as described in step 2.
●
Some shutter speeds may cause flickering on the screen when
recording under fluorescent or LED lighting, which may be
recorded.
Adjusting the Flash Output
Still Images
Movies
Choose from the three flash levels in [
][
][ ] modes.
1
Specify the flash mode.
z
Press the [
] button, choose [Flash
Settings] on the [ 5] tab, and then press
the [ ] button (= 30).
z
Press the [ ][ ] buttons or turn the
[ ] dial to choose [Flash Mode], choose
[Manual], and then press the [ ] button.
2
Configure the setting.
z
Raise the flash, press the [ ] button and
immediately turn the [ ] ring to choose
the flash output level, and then press the
[ ] button.
z
Once the setting is complete, the flash
output level is displayed.
[
]: Minimum, [
]: Medium, [
]:
Maximum
●
You can also set the flash level by accessing MENU (= 30)
and choosing [
5] tab ► [Flash Settings] ► [Flash Output].
●
You can also access the [Flash Settings] screen (= 30)
when the flash is up by pressing the [ ] button and immediately
pressing the [
] button.
●
You can also access the [Flash Settings] screen (= 30) by
pressing the [ ] button and touching [
].