Canon PowerShot G7 X Mark II - Manual (Page 180)

180
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Inserting and Charging the Battery Pack
Charge the battery pack by using the supplied battery pack with an
optional Compact Power Adapter CA-DC30/CA-DC30E and Interface
Cable IFC-600PCU.
1
Insert the battery pack.
z Follow step 1 in “Inserting the Battery
Pack and Your Memory Card” (= 19)
to open the cover.
z Insert the battery pack as described in
step 2 of “Inserting the Battery Pack and
Your Memory Card” (= 19).
z Follow step 4 in “Inserting the Battery
Pack and Your Memory Card” (= 19)
to close the cover.
2
Connect the compact power adapter
to the camera.
z With the camera turned off, open the
cover (1). Hold the smaller plug of the
interface cable (sold separately) facing
as shown and insert the plug fully into the
camera terminal (2).
z Insert the larger plug of the interface
cable into the compact power adapter.
(1)
(2)
3
Turn the TV on and switch to
external input.
z Switch the TV input to the external input
you connected the cable to in step 2.
4
Turn the camera on.
z Press the [ ] button.
z Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
z When finished, turn off the camera and
TV before disconnecting the cable.
● Touch-screen operations are not supported while the camera is
connected to a television.
● Some information may not be available when using a TV as the
display (= 198).
● Camera operating sounds are not played while the camera is
connected to an HDTV.
● When the camera and TV are connected, you can also shoot
while previewing shots on the larger screen of the TV. To shoot,
follow the same steps as when using the camera screen.
However, MF-Point Zoom (= 87), MF Peaking (= 88) and
Night Display (= 172) are not available.