Changing the focus setting fine-tuning the focus, Fine-tuning the focus, Changing the focus setting – Canon PowerShot G7 X Mark II User Manual
Page 92
92
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Fine-Tuning the Focus
Still Images
Movies
You can fine-tune after auto focus using the control ring.
1
Configure the setting.
z
Press the [
] button, choose
[AF+MF] on the [ 4] tab, and then
2
Focus.
z
Press the shutter button halfway to focus
on the subject, and continue holding the
button halfway down.
3
Fine-tune the focus.
z
Referring to the on-screen MF indicator
(which shows the distance and focal
position) that is displayed by turning the
[ ] ring and the magnified display, turn
the [ ] ring to adjust the focus.
z
To change the zoom factor of the
magnified display, press the [ ] button.
z
To cancel focusing, release the shutter
button.
4
Shoot.
z
Press the shutter button all the way down
to shoot.
●
Cannot be used with Servo AF (= 91).
Changing the Focus Setting
Still Images
Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
z
Press the [
] button, choose
[Continuous AF] on the [ 3] tab, and
then choose [Off] (= 30).
On
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press
the shutter button halfway.
Off
Conserves battery power, because the camera does not
focus constantly.