Viewing – Canon PowerShot SX410 IS User Manual
Page 20
20
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Browse through your images.
●
To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
●
To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
●
To return to single-image display, press
the [ ] button.
●
Movies are identified by a [
] icon.
To play movies, go to step 3.
3
Play movies.
●
Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
●
Playback now begins, and after the movie
is finished, [
] is displayed.
●
To adjust the volume, press the [ ][ ]
buttons.
Shooting Movies
1) Start shooting.
●
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
●
Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
●
Frames displayed around any detected
faces indicate that they are in focus.
●
Once recording begins, take your finger
off the movie button.
2) Finish shooting.
●
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1
Enter Playback mode.
●
Press the [
] button.
●
Your last shot is displayed.
(1)