Selecting a range – Canon PowerShot SX410 IS User Manual
Page 68
68
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Choose an ending image.
●
Press the [ ] button to choose [Last
image], and then press the [ ] button.
●
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●
Images before the first image cannot be
selected as the last image.
4
Protect the images.
●
Press the [ ] button to choose [Protect],
and then press the [ ] button.
●
To cancel protection for groups of images, choose [Unlock] in
step 4.
3
Protect the image.
●
Press the [
] button. A confirmation
message is displayed.
●
Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●
Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
Selecting a Range
1
Choose [Select Range].
●
Following step 2 in “Using the Menu”
(= 67), choose [Select Range] and
press the [ ] button.
2
Choose a starting image.
●
Press the [ ] button.
●
Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.