Shooting with the fe lock, Other settings, Changing the compression ratio (image quality) – Canon PowerShot SX410 IS User Manual
Page 59
59
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
Other Settings
Changing the Compression Ratio (Image Quality)
Still Images
Movies
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can
fit on a memory card, see “Number of Shots per Memory Card” (= 114).
●
Press the [ ] button, choose [ ] in the
menu, and choose the desired option
●
In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 60).
●
In [ ] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Off
For shooting without the flash.
●
If a blinking [ ] icon is displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions,
mount the camera on a tripod or take other measures to keep it still.
Shooting with the FE Lock
Still Images
Movies
Just as with the AE lock (= 50), you can lock the exposure for the flash shots.
1
Lift the flash and set the flash to [ ]
2
Lock the flash exposure.
●
Aim the camera at the subject to shoot with
the exposure locked. With the shutter button
pressed halfway, press the [ ] button.
●
The flash fires, and when [ ] is displayed,
the flash output level is retained.
●
To unlock FE, release the shutter button
and press the [ ] button again. In this
case, [ ] is no longer displayed.
3
Compose the shot and shoot.
●
FE: Flash Exposure