Canon PowerShot SX410 IS - Manual (Page 71)

71
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
2
Rotate the image.
● Press the [ ][ ] buttons to choose an
image.
● The image is rotated 90° each time you
press the [ ] button.
● To return to the menu screen, press the
[ ] button.
● Rotation is not possible when [Auto Rotate] is set to [Off]
(= 71).
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
● Press the [ ] button, choose [Auto
Rotate] on the [ ] tab, and then choose
[Off] (= 25).
● Images cannot be rotated (= 71) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
● In Smart Shuffle (= 66) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
Rotating Images
Still Images Movies
Change the orientation of images and save them as follows.
1
Choose [ ].
● Press the [ ] button, and then choose
[ ] in the menu (= 24).
2
Rotate the image.
● Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Using the Menu
1
Choose [Rotate].
● Press the [ ] button and choose
[Rotate] on the [ ] tab (= 25).