Adding a date stamp continuous shooting, Continuous shooting, Adding a date stamp – Canon PowerShot SX410 IS User Manual
Page 35
35
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
●
Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
-
Print using printer functions (= 91)
-
Use camera DPOF print settings (= 95) to print
Continuous Shooting
Still Images
Movies
Hold the shutter button all the way down to shoot continuously.
For details on the continuous shooting speed, see “Continuous Shooting
1
Configure the setting.
●
Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 24).
●
Once the setting is complete, [ ] is
displayed.
2
Shoot.
●
Hold the shutter button all the way down
to shoot continuously.
Adding a Date Stamp
Still Images
Movies
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (= 17).
1
Configure the setting.
●
Press the [
] button, choose [Date
Stamp ] on the [ ] tab, and then
choose the desired option (= 25).
●
Once the setting is complete, [ ] is
displayed.
2
Shoot.
●
As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
●
To restore the original setting, choose
[Off] in step 1.
●
Date stamps cannot be edited or removed.