Canon PowerShot SX410 IS - Manual (Page 87)

87
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting Modes
5
Playback Mode
6
Setting Menu
7
Accessories
8
Appendix
Index
4
P Mode
3
Turn the TV on and switch to video
input.
● Switch the TV input to the video input you
connected the cable to in step 2.
4
Turn the camera on.
● Press the [ ] button to turn the camera
on.
● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
● When finished, turn off the camera and
TV before disconnecting the cable.
● Correct display is not possible unless the camera video output
format (NTSC or PAL) matches the TV format. To change the
video output format, press the [
] button and choose
[Video System] on the [ ] tab.
Powering the Camera with Household Power
Still Images Movies
Powering the camera with AC Adapter Kit ACK-DC90 (sold separately)
eliminates the need to monitor the remaining battery level.
1
Make sure the camera is off.
2
Open the cover.
● Follow step 1 in “Inserting the Battery
Pack and Memory Card” (= 16) to
open the memory card/battery cover, and
then open the coupler cable port cover
as shown.
(1)
(2)
Using Optional Accessories
Still Images Movies
Playback on a TV
Still Images Movies
Connecting the camera to a TV with the AV Cable AVC-DC400 (sold
separately) enables you to view your shots on the larger screen of the TV
as you control the camera.
For details on connection or how to switch inputs, refer to the TV manual.
● Some information may not be displayed when viewing images on
a TV (= 105).
1
Make sure the camera and TV are
off.
2
Connect the camera to the TV.
● On the TV, insert the cable plugs fully into
the video inputs as shown.
● Make sure the cable plugs are in video
inputs of the same color.
● On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.