FujiFilm X-T1 - Manual (Page 38)

22
The DISP/BACK Button
■ Custom Display
To choose items for display in the viewfi nder and for the custom (and in manual focus mode, dual)
display options in the monitor (
P 21):
1 Select DISP. CUSTOM SETTING.
Select A SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu.
2 Choose items.
Highlight items and press MENU/OK to select or deselect.
• Framing grid ( P 91)
• Virtual horizon (see below)
• Focus distance (autofocus)
• Focus distance (manual focus)
• Histogram
• Exposure (aperture, shutter speed, and sensitivity)
• Exposure compensation
• Metering
• Flash mode
• White balance • Film simulation
• Dynamic range
• Number of exposures remaining/media
• Image quality and size
• Battery level
3 Exit.
Press DISP/BACK to exit when settings are complete.
R See page 5 for the locations of these items in the displays.
Virtual Horizon Virtual Horizon
Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two
lines overlap.
R The virtual horizon may not be displayed if the camera lens is pointed up or down.
P