FujiFilm X-T1 - Manual (Page 62)

46
More on Photography and Playback More on Photography and Playback
Choosing an Exposure Mode Choosing an Exposure Mode
The camera off ers a choice of program AE (P), shutter-priority AE (S), aperture-priority AE (A), and
manual exposure (M) modes.
Program AE (P) Program AE (P)
To allow the camera to adjust both shutter speed and aperture for opti-
mal exposure, set shutter speed and aperture to A. P will appear in the
display.
Q If the subject is outside the metering range of the camera, the shutter speed
and aperture displays will show “– – –”.
Aperture mode switch
P 200 2000 F5.6
11
1
2
2
3
3
00
Program Shift Program Shift
If desired, you can rotate the front command dial to select other combinations of
shutter speed and aperture without altering exposure (program shift). The new
values for shutter speed and aperture are shown in yellow. Program shift is not
available if the attached fl ash supports TTL auto, AUTO is selected for
U DYNAM-
IC RANGE in the shooting menu ( P 79), or the sensitivity dial is rotated to A (P 50).
To cancel program shift, turn the camera off .
P 200 2000 F5.6
11
1
2
2
3
3
00 Shutter speed
Aperture