FujiFilm X-T1 - Manual (Page 85)

69
M
o
re
o
n
Ph
o
to
g
ra
p
h
y a
n
d Pl
a
y
b
a
ck
Recording Pictures in RAW Format Recording Pictures in RAW Format
To record raw, unprocessed data from the camera image sensor, select a RAW option for image qual-
ity in the shooting menu as described below. JPEG copies of RAW images can be created using the
j RAW CONVERSION option in the playback menu, or RAW images can be viewed on a computer us-
ing the RAW FILE CONVERTER application that is installed with the software on the supplied CD (
P 99, 100).
1 Press MENU/OK in shooting mode to display the shooting menu. Press the selector up or down to
highlight T IMAGE QUALITY and press MENU/OK.
2 Highlight an option and press MENU/OK. Select RAW to record only RAW images, or FINE+RAW or
NORMAL+RAW to record both JPEG copy together with the RAW images. FINE+RAW uses lower
JPEG compression ratios for higher-quality JPEG images, while NORMAL+RAW uses higher JPEG
compression ratios to increase the number of images that can be stored.
The Function Buttons The Function Buttons
To toggle RAW image quality on or off for a single shot, assign RAW to a function button ( P 79). If a JPEG option
is currently selected for image quality, pressing the button temporarily selects the equivalent JPEG+RAW option.
If a JPEG+RAW option is currently selected, pressing the button temporarily selects the equivalent JPEG option,
while if RAW is selected, pressing the button temporarily selects FINE. Taking a picture or pressing the button
again restores the previous setting.
R RAW image quality options are not available at sensitivities of L, H1, or H2 (P 50).