Roland A-88MKII MIDI Keyboard Controller - Manual (Page 12)

12
The A-88MKII lets you save settings such as zones and controllers in
the user memory as “snapshots” (up to eight).
User Memory
Zone
UPPER 1
USB MIDI
MIDI OUT
Zone
UPPER 2
USB MIDI
MIDI OUT
Zone
LOWER
USB MIDI
MIDI OUT
Assign parameter Velocity curve Transpose setting
Recalling a SNAP SHOT
2
1
3
1.
Press the [SNAP SHOT] button to turn snapshot on.
Pads in which a snapshot is already written are lit pale white.
These can recall user memories.
2. Use the pads to specify the number of the snapshot that
you want to recall.
The pad and the [NEXT] (ENTER) button blink.
3. Press the [NEXT] (ENTER) button .
The settings are recalled.
Saving a SNAP SHOT
Here’s how to write the current settings to a snapshot.
2
1
3
1
1. Hold down the [SHIFT] button and press the [SNAP SHOT]
button .
2. Specify the pad into which you want to write the snapshot.
The pad and the [NEXT] (ENTER) button blink.
3. Press the [NEXT] (ENTER) button .
The settings are written.
Saving the Settings
(SNAP SHOT)