Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 110)

108 108
What to Do When...
Navigation Guidance
■ Camera warning
The warning for Road Safety Cameras can be turned on in Warning Settings. Touch the
following switches: [Menu], [Settings], [Warnings], [Speed Camera Warning]
When you approach a Road Safety Camera with the warning enabled, the following happens.
● Visible Warning: The type of the camera is displayed in the secondary Turn Preview field (for
example ).
● Audible Warning: When no speed limit specified for the camera, or your speed is under the
specified speed limit, single beeps warn you about the camera.
● If you exceed the speed limit of the camera, the following also happens.
● Visible warning: A symbol with the speed limit appears in the corner of the map
(for example: ).
● Audible warning: A special alert sound is played.
■ Road Safety Camera types
There are different types of Road Safety Cameras.
Symbol Type Description
Fixed Some speed cameras stand by the roadside, looking
in one direction, measuring traffic in one or both
directions. They measure your current speed. For
these speed cameras you can specify the controlled
traffic direction and the speed limit. Navigation warns
you when you approach these speed cameras in the
measured direction. If your speed exceeds the speed
limit near the speed camera, Navigation plays a
special warning sound.
Mobile Some speed cameras are operated from vehicles.
They are not constantly in operation and are not set to
check a preset speed limit. The warning is similar to
fixed speed cameras, but as there is no speed limit
given, only the proximity is announced.
Built-in Some speed cameras are built into traffic lights. They
work like fixed speed cameras, but they are difficult to
spot. The warning for proximity and speeding is the
same as for the fixed speed cameras.