Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 26)

24 24
About This Receiver
Before Use
● The disc will be ejected automatically.
● Press to close the display.
When the screen shines due to ambient
sunlight, you can adjust the angle of the
display.
CAUTION
IMPORTANT
1
Press .
2
Touch .
3 After removing the disc, touch
.
Adjusting the Display
Angle
When adjusting its angle, take care not to
pinch your fingers. Otherwise you may hurt
yourself or the display may fail.
● Do not load a disc when the display is
tilted. If this caution is not observed, this
receiver or the disc may be scratched.
● When adjusting the display angle, use the
following notes.
Automatic transmission (AT) car:
Adjust the display angle so as not to get in
the way when shifting the AT lever to any
of the P, r, or N positions. (If the lever shift
is interfered with, do not tilt the display.)
Manual transmission (MT) car:
Adjust the display angle so as not to get in
the way when shifting the MT lever to any
of the 1/3/5 or r positions. (If the lever
shift is interfered with, do not tilt the
display.)