Unloading a disc – Eclipse - Fujitsu Ten ECLIPSE AVN726E User Manual

Page 25

Advertising
background image

23

23

● The display will close automatically when

the disc is inserted.

● Hold a DVD or CD correctly (by inserting

your finger in its center hole and by holding
the disc edge by another finger), face the
disc label side upward, and insert the disc
into the slot.

● When you insert a DVD into slot, its movie

will be played in the DVD mode.

● When you insert a CD into slot, its music

will be played or the MP3/WMA play will
start.

ATTENTION

Press

for a second or more to open the

display.

Unloading a disc

IMPORTANT

3

Insert a disc into the slot.

Disc

● When unloading a disc, use the following

notes.
Automatic transmission (AT) car:
If it is difficult to unload disc when the shift
lever is in the P position, shift it to the N
position. (If your car has a column shift
lever, shift it to the P or N position.)
Manual transmission (MT) car:
If it is difficult to unload disc when the shift
lever is in “1”, “3”, “5” or “r” position, shift it
to the Neutral position.

● Take care NOT to close the display when

the ejected disc remains in the slot. If this
caution is not observed, this receiver or the
disc may be scratched.

● Do not attempt to close the front panel by

hand. Doing so may damage the display.

● Do not put cups, cans, or any other objects

on the display when it is open. Doing so
may damage the display.

● Wipe and clean the display immediately if

juice or other liquid spills onto it. If it is not
cleaned, the display may be damaged.

● To protect the display from heat and dust,

keep the display closed except when you
load or unload a disc.

Advertising