Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 173)

171 171
● F Random playback: Plays files of all
folders in random order.
Random playback: Plays files of currently
playing folder in random order.
● Touch to continue the random
play until you cancel it. Touch
again to cancel the random play.
● If you touch during random play,
the current track is repeated. When you
touch
again, random play
restarts.
■ About supported USB memory
standards
● Supported file format:
FAT 12/16/32
● Supported audio format:
MP3/WMA
● Maximum current:
500 mA
● Compatibility:
USB 1.1/2.0 (MAX transfer rate is equal to
USB 1.1)
● Mass memory support:
USB mass storage (such as an external
HDD) is supported.
■ Supported MP3 file standards
● Supported standards:
MPEG-1, MPEG-2, and MPEG-2.5
● Supported sampling frequencies:
MPEG-1: 32, 44.1
MPEG-2: 16, 22.05, 24
MPEG-2.5: 8, 11.025, 12
● Supported bit rates:
8 to 320 Kbps
* Supported VBR (8 to 320 Kbps)
* Does not support free format.
● Supported channel modes:
Monaural, Stereo, Joint Stereo, Dual-
Channel
● USB hub and multi card reader are not
supported.
■ ID3 tags
MP3 files have an “ID3 Tag” that allows
information to be entered so that data such
as a track title and artist can be saved.
This receiver supports ID3v. 1.0, 1.1, 2.2, 2.3
and 2.4.
Random Play of Music
Files
1
It will perform Random playback by
touching
, and F Random
playback by touching it for over 1
second.
About USB Devices
Random
Random
Random
Repeat
Repeat