Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 130)

128 128
Operation
Adjusting sound quality
You can set the sound quality and adjust the sound balance and the like.
When you switch to the Audio settings screen
from any of the Audio operations screens, the
following operations are available.
● Adjusting audio balance
● Adjusting woofer
● Setting loudness
● Setting source volume control
● Adjusting sound quality
● Touch to return to the immediately
preceding screen.
You can adjust the forward and back, and left
and right balance.
● To fine adjust, touch any of the balance
switches , , , to
change the corresponding value by 1.
When you touch and hold one of the
balance adjusting switches
, ,
, or , the balance will continue
to change, but stop at the center value. To
continue to change the balance, touch one
of the balancing switches again.
● Touch to cancel the fader/
balance settings value and return to the
center values.
● On completion, touch to store the
setting and return to the immediately
preceding screen.
Display of Audio Settings
Screen
1 Touch on any of the audio
operations screens.
2
Touch the switch you wish to set.
Sound
Done
Adjusting audio balance
1
Touch .
2
Touch the desired balance point.
BAL/FAD Setting
Center