Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 219)

217 217
● Touch to return to the immediately
preceding screen.
● Next page is displayed by touching
or .
● It will display Completed when the setting
is completed, then it will return to
Command Select screen and displays
Store on the set command.
● “Error, try once again” is displayed when
the data reading fails.
● Touch to return to the immediately
preceding screen.
● Touch to return to the immediately
preceding screen.
ATTENTION
If “Error, try once again” is shown on the
display, once again select a desired function to
set.
5 Touch until the Command
Select screen is displayed.
6
Touch the command you wish to set.
7
While pressing the steering switch
button to record, touch the
until a beep sounds.
Store
Store
8
Assign the desired functions to the
steering wheel switch buttons by
repeating Steps 6 through 7.
9
Touch .
10 Touch after confirming the final
confirmation screen.
Finalize
Done