Eclipse - Fujitsu Ten ECLIPSE AVN726E - Manual (Page 22)

20 20
About This Receiver
Before Use
■ Touch switch
Touch the switches on the screen to operate.
IMPORTANT
About touch switch operations
● Keep touching the touch switch until “beep” is emitted in response. (When guide tone is set
to ON.)
● To protect the screen, touch the touch switch lightly with your finger.
● When there is no response from switch, remove your finger from the screen and touch
again.
● Disabled touch switches have their color toned down.
● When the switch function is enabled, the switches return to brighter colors.
Touch the touch switches with your finger.
Operating touch switches with the point of hard objects such as ballpoint pens or mechanical
pencils can damage screen.
Touch switch