Warning indicators, Tips on speedlight care and reference information – Nikon SB-5000 AF Speedlight User Manual

Page 104

Advertising
background image

F-3

Tips on Speedlight Care and Reference Information

En-03

F

Problem

Cause

Solution

0

The SB-5000
does not work
properly.

Microcomputer may have
malfunctioned if this occurs
even when fresh batteries are
properly installed.

• Remove the batteries

and insert them again,
keeping the SB-5000’s
power switch set to a
position other than [OFF].

• If the problem continues,

contact your retailer or
Nikon-authorized service
representative.

B-14

Nonstandard
display

Dials or buttons
do not operate.

Key lock is activated.

Cancel key lock.

B-8

The SB-5000
does not
operate.

Thermal cut-out is active.

Wait until the SB-5000 cools
down.

E-16

Warning indicators

Warning indicator

Cause

Solution

0

All operations have stopped
due to low battery power.

Replace the batteries.

B-15

The flash function is
canceled, and all operations
except power ON/OFF and
menu settings have been
suspended because the
SB-5000 has overheated and
could become damaged.

• Allow the SB-5000 to

cool down, keeping
the SB-5000’s power
switch set to a
position other than
[OFF].

• If the cooling system

is canceled, activate
it in the setup menu.

B-22

E-16

Advertising