Ashly mXa-1502 12-Channel 4-Zone DSP Mixer-Amplifier - Manual (Page 26)

6.2i Signal Chain > Ducking
This dedicated ducking setup screen is used for
easy editing and at-a-glance visibility.
• Each of the four mixers (zones) have their
own independent ducking setup.
• Stereo inputs 9-12 sum both inputs to duck
other channels.
• Priority : Each input can be assigned a
ducking priority from 1 to12, with 1 being
highest priority. Multiple channels can share
the same priority level.
• Filibuster : Filibuster On means that channel
will maintain control over all other channels
until its input signal is no longer present,
even if other channels have a higher priority.
• Depth : Ducking depth is the reduction
in signal level for that channel when it is
ducked by another channel with a higher
priority. Ducking depth can be set from 0dB
to -inf.
• Release : Ducking release time is how long
it takes for ducked signals to return to their
normal level. Release time can be set from
50ms/dB to 1000ms/dB.
• Trigger Threshold : Trigger threshold
determines the signal level required to
activate that channel's ducking control over
other lower priority channels. To prevent an
input channel from ducking other channels,
set its priority to 12, or set its trigger
threshold to maximum.
26
mXa-1502 • Operating Manual Ashly AquaControl™ Software