Emerson LIEBERT GXT5000R-208 - Manual (Page 24)

20
UPS COMMUNICATIONS WITH INTELLISLOT
Your GXT5000R-208 comes equipped with the RELAYCARD-INT relay card. The addition of
serial communications now expands the list of cards that may be used in the Intellislot.
The UPStation GXT5000R-208 UPS is equipped with an Intellislot bay to provide advanced
communication and monitoring options.
Liebert’s MultiLink™ software continually monitors the UPS via a serial cable and can shut
down your computer or server in the event of an extended power failure.
MultiLink can also be configured for use without the serial cable when the Intellislot SNMP/
Web card is installed in the UPS. Additionally, MultiLink can be configured to coordinate
shutdown across the network with other computers running MultiLink when you purchase a
MultiLink License Kit. For more information about the Intellislot SNMP/Web Card and Mul-
tiLink License Kits, please visit the Web site http://multilink.liebert.com or contact your local
dealer or Liebert representative.
Several option cards are available for use in the Intellislot bay of the UPStation GXT5000R-
208. The Intellislot SNMP/Web Card provides SNMP and Web-based monitoring and control
of the UPS across the network.
The Intellislot MultiPort 4 Card allows you to install MultiLink software on four computers
and coordinate an orderly shutdown in the event of a power failure.
The standard Intellislot Relay Card provides dry contact relay outputs for custom-wired
applications and delivers support for built-in shutdown for AS/400 systems.
!
CAUTION
TO MAINTAIN SAFETY (SELV) BARRIERS AND FOR ELECTROMAGNETIC
COMPATIBILITY, SIGNAL CABLES SHOULD BE SEGREGATED AND RUN
SEPARATE FROM ALL OTHER POWER CABLES, WHERE APPLICABLE.