Henny Penny EEE-143 - Manual (Page 58)

Model EEE-141,142, 143, 144
7-1. TROUBLE SHOOTING GUIDE
Problem Cause Correction
SECTION 7. TROUBLESHOOTING
POWER switch ON but
fryer completely inoperative
Control error code “E-10”
Vat is under-filled
• Open circuit
• Open high limit circuit
• JIB is low or empty
• JIB oil line is clogged or
collapsed
• Filter pan needs cleaned
• Plug fryer in
• Check breaker or fuse at supply box
• Circuit breakers in fryer tripped-Open left
door and reset circuit breakers on fryer;
See below
• Reset the high limit by using a small
screwdriver or Allen wrench, gently
pushing it into the hole in the heating
element hinge; if high limit does not reset,
high limit may need replaced
• Fill the JIB
• Check JIB line
• Check JIB tube & connection
• Clean filter pan and change paper or pad
209 7-1