Honeywell DOLPHIN 9951 - Manual (Page 136)

13 - 4
Inserting and Removing Terminals
1. Slide the terminal into the well until the Dock LED lights solid green.
2. Charging begins immediately.
Note: To remove a terminal, grasp it firmly in your hand and lift it up and out of the terminal well. The LEDs for the
terminal well turn off.
Charging Terminals
The main battery of each terminal charges in 4.5 hours. The intelligent battery charging system
incorporated into all Dolphin terminals prevents overcharging, which means that Dolphin terminals may
be seated in the base indefinitely without damage to the terminals, battery packs, or the base.
1. Power the base; see Supplying Power on page 13-3.
2. Slide the terminal into the well until the Charging LED lights solid green. The Charge LED lights
green to indicate that the terminal is powered and charging.