Honeywell VOYAGER 1250G - Manual (Page 135)

6 - 39
Default = Don’t Require Coupon Code.
UPC-A Number System 5 Addenda Required
This setting programs the scanner to require any combination of a coupon
code, a 2 digit addenda, or a 5 digit addenda on UPC-A bar codes that
begin with a “5.” The following settings can be programmed:
Require Coupon Code/Addenda: All UPC-A bar codes that begin with a
“5” must have a coupon code, a 2 digit addenda, a 5 digit addenda, or a
combination of these addenda. The UPC-A bar code with the coupon code
and/or addenda is then transmitted as a single, concatenated bar code. If a
coupon code and/or required addenda is not found within the
Addenda
Timeout period, the UPC-A bar code is discarded.
Don’t Require Coupon Code/Addenda: If you have selected Require
Coupon Code/Addenda, and you want to disable this feature, scan Don’t
Require Coupon Code/Addenda. UPC-A bar codes are transmitted,
depending on the setting you are using for
UPC-A/EAN-13 with Extended
Coupon Code .
Require Coupon Code
* Don’t Require Coupon Code