Honeywell VOYAGER 1250G - Manual (Page 210)

9 - 38
MSI Check Character *Validate Type 10,
but Don’t Transmit MSICHK0 6-59
Validate Type 10 and
Transmit MSICHK1 6-59
Validate 2 Type 10
Chars, but Don’t
Transmit MSICHK2 6-59
Validate 2 Type 10
Chars and Transmit MSICHK3 6-59
Validate Type 10
then Type 11 Char,
but Don’t Transmit MSICHK4 6-59
Validate Type 10
then Type 11 Char
and Transmit MSICHK5 6-59
Disable MSI Check
Characters MSICHK6 6-59
MSI Redundancy Range (0 - 10) *0 MSIVOT## 6-59
MSI Message Length Minimum (1 - 80) *3 MSIMIN## 6-60
Maximum (1 - 80)
*80 MSIMAX## 6-60
Plessey Code Default All
Plessey Code
Settings PLSDFT 6-60
Off PLSENA0 6-60
*On PLSENA1 6-60
Plessey Check Char. *No Check Char. PLSCHK0 6-61
Validate, But Don’t
Transmit PLSCHK1 6-61
Validate,
and Transmit PLSCHK2 6-61
Plessey Redundancy Range (0 - 10) *0 PLSVOT## 6-61
Plessey Message
Length Minimum (1 - 80) *3 PLSMIN## 6-61
Maximum (1 - 80)
*80 PLSMAX## 6-61
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric
entry Page