Configuring input devices, Camera setup screen, Figure 3-15 – Honeywell HRHD 410 User Manual
Page 51: Device menu, Figure 3-16
Configuration
Rev 3.01
33
Document 900.0315
10/05
Configuring Input Devices
Use the Device menu (MENU
➤
Device) to configure the video, audio, and remote
control devices connected to the DVR.
Figure 3-15
Device Menu
Camera Setup Screen
Use the Camera Setup screen to turn each camera on or off and to hide the video
associated with that camera number. Highlight Camera in the Device menu (MENU
➤
Device
➤
Camera) and then press # . The Camera setup screen displays.
Figure 3-16
Camera Setup Screen
1.
To hide the video associated with a camera number, highlight the camera Setup
heading and then press # . You can select the Setup field for one specific camera
or select the Setup heading to change the settings for all four cameras at once.
Select from the following options in the drop-down list:
On, Off, Covert 1, Covert 2