Honeywell HRHD 410 - Manual (Page 70)

Configuration
Rev 3.01 52 Document 900.0315
10/05
Motion Detector Event Action (Alarm Out) Setup Screen
Use this screen to set the DVR to react to motion events differently by activating an
internal buzzer and/or external alarms.
Figure 3-36 Motion Detector Event Action (Alarm Out) Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.
2. Highlight the Alarm Out box and select either Beep and/or the alarm output
terminal that you want to associate with the motion event.
3. Highlight the Dwell Time box and set the length of time you want the output
activated.
Motion Detector Event Action (Notify) Setup Screen
Use this screen to set the DVR to notify the remote site when certain motion events are
activated.
Figure 3-37 Motion Detector Event Action (Notify) Screen
1. Highlight the Sched box and then press # . A schedule screen displays. Set the
schedule as described earlier.