Text in setup screen, Figure 3-21, Text-in setup screen – Honeywell HRHD 410 User Manual
Page 55
Configuration
Rev 3.01
37
Document 900.0315
10/05
Text In Setup Screen
Use the Text-In Setup screen to set the DVR to display the text-in information. Highlight
Text-In in the Device menu (MENU
➤
Device
➤
Text-In) and then press # . The
Text-In setup screen displays.
Figure 3-21
Text-In Setup Screen
Note
If networking is configured by the external modem, the text-in
cannot be set up. Set the DVR for LAN connections and set up
text-in for the RS232C port.
Note
Text-in data will not be recorded during clip copy.
1.
To set the DVR to display the text-in information, highlight the box beside Use
Text-In and press # to toggle between On and Off.
2.
Highlight the box beside Product Type and then press # . Select your device from
the list.
Note
Generic Text and E-POS devices are currently supported.
3.
Highlight the box beside Multi-devices on 1 channel box and then press # to
toggle between On and Off.
When it is On, the DVR supports up to 4 text inputs.