Honeywell HRHD 410 - Manual (Page 93)

Operation
Rev 3.01 75 Document 900.0315
10/05
4
Operation
This chapter covers the following topics:
• Live monitoring
• Recording video
• Recording audio
• Playing recorded video
• Searching for video by date/time, calendar, and events
Note This chapter assumes you have correctly installed and
configured your DVR. If you have not, please see
Chapter 2 for
installation and Chapter 3 for configuration.
The DVR controls are similar to a VCR. As with a VCR, the main functions are recording
and playing back video. However, you have much greater control over recording and
playing back video. You can:
• Establish recording schedules based on time of day and day of the week
• Search through the recorded video using much more sophisticated tools than
those available with VCRs
Features of your DVR that are not available with traditional VCRs are:
• View video remotely
• Record video at the same time you are watching previously recorded video
The DVR operates even when no hard disk drives are installed. In this case, recording,
playback, and any processes that access hard disk drives, are not supported. You can
only view live video and establish system settings that are not related to hard disk drive
operation. Also, the unit can be connected with RAS Watch either via Ethernet or
modem.