Honeywell HRHD 410 - Manual (Page 75)

Configuration
Rev 3.01 57 Document 900.0315
10/05
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Display Setup
Highlight OSD or Main Monitoring in the Display menu, and then press # to set up the
on-screen display or camera display on the main monitor.
OSD (On-Screen Display) Setup
Use the OSD Setup screen (MENU ➤ Display ➤ OSD) to set the DVR to display Date,
Time, Title and Status on screen. Each feature can be turned on or off. You can also set
up where you want the video to display on the screen by adjusting the margins.
Figure 3-44 OSD Setup Screen
1. Highlight the box beside Date and then press # to toggle the date display On and
Off.
2. Highlight the box beside Time and then press # to toggle the time display On and
Off.
3. Highlight the box beside Title and then press # to toggle the camera title display
On and Off.
4. Highlight the box beside Status and then press # to toggle status display On and
Off.